收藏本站
我的資料
   
查看手機網站

        河南省啟源
重型機械設備有限公司

產品詳情

駕駛室控制臺

編號 qzpj
產品詳情

1、結構特點
  采用優質型材拼焊成高強度骨架,外覆數控機床加工后的優質冷軋板,整個駕駛室外形挺括平整。在骨架內部襯上防火、隔熱、隔音材料后進行內部裝飾,四周裝飾用中密度板及鋁塑板裝飾或用薄鋼板鉚接成形。窗戶通常采用5mm厚鋼化或夾層等安全型玻璃、其透光度不低于80%,玻璃通過橡膠嵌條固定,移窗為鋁合金或塑鋼型材制成窗框后,通過橡膠嵌條固定,前部擋風玻璃處有安全防護攔桿。門為帶保溫鋼質移門或開式結構門,門上方帶有玻璃固定窗,中部配有內外帶執手的司機室專用門鎖,四周采用密封膠條雙層密封。室內地板采用可拆卸的4mm厚鋼板,并在上部鋪設防滑絕緣綠化橡塑地毯??刂茖Ь€可在地板下的導線架上捆扎,電纜出線口進行電纜防磨損處理。如果室外帶平臺,平臺上的地板為花紋、熱鍍鋅格柵板。司機室油漆采用環氧富鋅底漆、環氧云鐵中間漆、聚胺脂面漆,漆膜總厚度不低于210um。室內通常配有帶防護罩的日光燈,燈開關及一只備用電源插座,前擋風玻璃處裝有雨刮器及噴水裝置。
2、采用標準
  GB/T 14407-1993《通用橋式和門式起重機駕駛室技術條件》
  JT 5020-1986《港口裝卸駕駛室》
3、使用環境
  工作環境溫度為-25℃~40℃
  使用場地為高溫或低溫以及塵埃危害等特殊要求的車間、倉庫、料場、貨場、電站、港口、船廠等,頂部承載能力靜載荷 > 2.5KN/m2。


Summary of the cab

1, the structure characteristics

Skeleton is made of high quality material welding into high strength, high quality manufacture, coated with numerical control machine tool processing after the entire cab crisp flat shape. On the frame of internal lining after fire, heat insulation, sound insulation materials for interior decoration, decoration around MDF and aluminum-plastic plate decoration or thin plate with riveting molding. Windows usually use 5 mm thick toughened or laminated safety glass, the light transmittance of no less than 80%, the glass panels by rubber fixed, move the window made of aluminum alloy or plastic profile window frame, through the rubber strip is fixed, the front windshield with security guard rail. Door with insulation steel door or open door structure, above the door with a fixed window glass, equipped with central with a hand inside and outside the driver room dedicated door lock, adopt sealing strip around double seal. Indoor floor is made of removable 4 mm thick steel plate, and laid in the upper antiskid insulated green rubber and plastic carpet. Control wire in the under floor wiring rack strapping, cable and outlet cable abrasion processing. If outdoor platform, the floor of the platform for the decorative pattern, hot dip galvanized gratings. Cab paint using epoxy zinc rich primer, epoxy micaceous iron oxide intermediate paint, polyurethane paint, paint film thickness not less than 210 um. Indoor usually comes with protective cover of fluorescent lamp, lamp switch and a standby power supply socket, windscreen installed with wiper and spray device.

2, with a standard

GB/T 14407-14407 "general bridge type and gantry crane cab technical conditions"

JT, 5020-1986, the port loading and unloading bridge

3, the use of the environment

Working environment temperature is 25 ℃ and 40 ℃

Use space for high or low temperatures and dust hazard and other special requirements of workshop, warehouse, yard, loading bays, power stations, ports, shipyards, etc., at the top of the static load bearing capacity & gt; 2.5 KN/m2


website qrcode

掃描進入手機網站

會員登錄
登錄
留言
回到頂部